Used Martin Audio Audience 12: Buying Guide and Condition Notes

The Martin Audio Audience 12 is a compact, high-output line array element built around 2 x 12" LF drivers and 2 x 1.4" HF compression drivers, rated at 2000 W AES with 90° H × 10° V coverage and a frequency range of 65 Hz – 20 kHz. With a maximum SPL of 138 dB and 4 Ω impedance, it suits mid-size rental inventories and fixed installs where predictable pattern control matters more than cabinet count. If you are sourcing used line array speakers for export, the Audience 12 is a workhorse candidate — but only when the cabinets have been properly inspected.

Condition grade A on this lot means the enclosures, grilles and rigging hardware should show only light cosmetic wear, with drivers intact and no signs of moisture damage or impact deformation. Ask for close-up photos of the HF throat area, the LF cone surrounds and every rigging point. On a used Martin Audio Audience 12, the integrated rigging points and compatibility with the Martin Audio rigging system are the first things to verify: bent pins, ovalised holes or missing quick-release hardware can turn a bargain into a fabrication job. Confirm that bumpers and link bars are included where the seller states them, and treat any missing rigging component as a cost line in your landed price.

Because these boxes are often ex-rental, request a driver sweep and an impedance check per cabinet rather than a single pass/fail report. A 4 Ω load that reads noticeably off nominal, or an HF section that is down several dB against its pair, points to diaphragm fatigue or a tired compression driver. For buyers assembling a full system, pair the Audience 12 with appropriate subwoofers and DSP presets, and read our used pro audio equipment for export notes on packing, palletising and documentation before you commit to a container mix.

Twelve units available is a useful quantity: enough for a small flown array per side with spares, or for a venue owner standardising a house system. Distributors should confirm the exact quantity they need against the listing, since partial lots move quickly. If you are comparing this cabinet against other inventory, our second hand line array system buying guide covers the checks that matter across brands — driver history, rigging certification and cosmetic grading consistency.

For rental companies and system integrators working on venue projects, the Audience 12's 10° vertical dispersion rewards careful array design; plan trim heights and splay angles before purchase so you know how many boxes a room actually needs. Venue owners fitting a line array system for a live venue should budget for amplification, processing and rigging alongside the cabinets. To review this specific lot, see the used Martin Audio Audience 12 for sale page and request current photos, driver test results and a packing proposal for your destination port.

Finally, treat grade A as a starting point, not a warranty. Ask for serial-level photos, a short video of each cabinet under test, and confirmation of what is included in the sale. For export buyers in the Middle East, Southeast Asia, Africa, Europe and South America, clear packing lists and consistent labelling save days at customs. Confirm voltage and connector standards for your market, and specify FOB terms explicitly in your enquiry so freight and risk transfer are unambiguous.

Questions about this unit or about shipping to your country? Contact us for condition photos, test results and a quote.